![Belimo 22ADP-566L Differential Pressure Sensor Air, 0...28 inch WC [0...7000 Pa], BACnet, 0...5 V, 0...10 V, LCD](https://hsgroupexport.com/wp-content/uploads/2025/08/PIC_AM_22ADP-5.L_01_4C-product_retina-300x300.jpg)
![Danfoss Pressure switch, KP1 060-111066 Regulation range [bar] Pe: -0.2 - 7.5, Differential [bar]: 0.7 - 4, Contact function: SPDT, Reset function: Auto, Pressure connection type: Solder, ODF, Pressure connection size: 6 mm, Pressure Male/Female: Female, Enclosure rating IP: IP44, Max. Working Pressure [bar]: 17](https://hsgroupexport.com/wp-content/uploads/2025/08/ID527637753231-0101_preview.jpg)
![Danfoss Solenoid coil, BJ120CS, Junction Box, 0.2 m, Supply voltage [V] AC: 110, Multi pack 018F4110 Electrical connection: Junction Box, Supply voltage [V] AC: 110, Frequency [Hz]: 50/60 Hz, Enclosure rating IP: IP30](https://hsgroupexport.com/wp-content/uploads/2025/08/ID107325114939-0101_preview.jpg)
Schneider Duct Temperature and Humidity Sensors SHD100 006902321
The SHD100 is an active sensor, which measures relative humidity (% RH)
and converts the measurement into an electric current 4 … 20 mA or a voltage level 0 … 10 Vdc. SHD100 is intended for duct installation and is used for
relative humidity measurement within air ducts. The transmitter is delivered as
a complete unit, comprising an aluminium mounting flange with the sensing
element, and an amplifier mounted in a separate housing.
The sensor has negligible hysteresis and is insensitive to dust as well as a
wide range of chemicals. The housing accommodates a 20 mm dualdimension conduit. A conduit gland nut is supplied with the unit.
Models with -T also include temperature measurement through use of a
passive thermistor output suitable for connection to the appropriate controller
system type.
Calibration certificates: See Appendix B
Output Selectable, 0 … 10 Vdc or 4 … 20 mA
Range 0 … 95% RH
Accuracy ±2%
Supply 24 Vac/15 … 36 Vdc
006902381
SHD101-T5
